prefabricated Industrial Metal Steel Buildings

workshop, storage, factory, warehouse, etc.

Industrial Steel Buildings, means to pre-engineered buildings mainly used as factories, workshops, poultry buildings, warehouses, etc. Also come with commercial sections like office units, mini storage units, and so on. We researched and found that most of our clients require short delivery time, short construction time, and large span, and more important—Natural disaster-resistant. Like these years, we exported many steel structure industrial buildings to the Philippines, Indonesia, and Singapore. The customers there request that the building needs to be hurricane-resistant.

If you are looking for fast construction, low cost, and safe industrial building, K-HOME is your best choice.

Advantages of Industrial Steel Buildings

Fast Construction

The construction of the steel structure industrial building is rapid, and the emergency advantages are apparent, which can meet the sudden needs of the enterprise.

Environment friendly

The steel structure is dry construction, which can reduce the impact on the environment and nearby residents. It is much better than reinforced concrete buildings.

Low Cost

Steel structure can save construction costs and workers’ costs. The cost of a steel structure industrial building is 20% to 30% lower than a typical one, and it is more secure and stable.

Light Weight

The steel structure is lightweight, and the building materials used in walls and roofs are much lighter than concrete or terracotta. Also, the transportation cost will be much lower.


K-HOME is one of the trusted factory manufacturers in China. From structural design to installation, our team can handle various complex projects. You will receive a prefabricated structure solution that best suits your needs.

You can send me a WhatsApp message (+86-18338952063), or send an email to leave your contact information. We will contact you as soon as possible.

Having Trouble with Design?

We can provide the one-stop solution for you, from design, manufacture, transportation to installation. Our technical team has more than 10 years of work experience in this steel structure design industry. They will make professional structural calculations on every project to make sure the safety of the structure. A good design is also helpful for saving costs and installation.

Our technologically adaptable professionals utilize the latest designing software and bring forth client-specific structures featuring assurance of aesthetics and compliance to the architectural standards. Before production, we will also make a detailed structural drawing and production drawing (including the size and quantity of each component, as well as the connection method), to ensure that after you receive the goods, there will be no missing components, and you can install each part correctly.

Design of roof and wall structure

Roof System

  • Roof panel: You can use steel plate or sandwich panel, it depends on your budget and usage of your building.
  • Sky light: The material is Transparent Fiberglass Plastic Roofing Tile, which can let the sunlight into your building. It’s very common in steel workshop or factory.
  • Ventilators: You can use turbo ventilator or ridge ventilator.
  • Roof beam: It include crane beam, floor secondary beam, both ends are connected to the main beam. The other beams connected are secondary beams, and the force transmission path is always secondary.
  • The steel frame: The steel frame type is normally H-section Steel, the material is Q235B, and Q355B.
  • Roof purlins: They sit between the roofing sheets and the roof beam, acting as a support for the sheet to ensure it is firmly attached and safely in place, and transmits the roof load to the steel frame.
  • Drainage system: Water gutter and down pipes.
  • Small parts: Roof bracing, tie rod and flashing.

Wall System

  • Wall panel: You can use steel plate or sandwich panel, it depends on your budget and usage of your building.
  • Wall purlins: For exporting, we will design Z-purlins to save shipping container space.
  • Small parts: Column bracing, tie rod and flashing.

Steel Mezzanine Floor

Steel Mezzanine Floor is generally built to expand the area used. It is more usable for multi-storey buildings.

Secondly, the original building structure can be added with steel mezzanine floor, which has excellent load-bearing characteristics, so that the two structures are sufficiently integrated, and the safety factor is improved. The design plan of the steel sandwich panel should be effective and reasonable. Read More

Steel Mezzanine Floor

Judge the stress point of the foundation

In many construction projects, metal industrial buildings, due to the different scales and uses of the buildings, the size and nature of the loads on the structure are also different.

In addition, due to the geological structure of the location of the building, the building has a certain degree of uneven settlement. Therefore, in order to achieve the stability of the structure under different conditions, the basic form of the structure is selected differently.

When selecting the foundation of a steel structure building, the influence of these factors should be fully considered, and the geological conditions, soil quality, distribution, groundwater conditions, etc. should be systematically analyzed, and the work should be fully combined with the local reality.

Generally speaking, the column distance and span of the metal industrial buildings are relatively large, so when the local quality conditions are good, the independent foundation form can be adopted.

When the geological conditions are not ideal or the building requirements are high, pile foundations are usually used.

Pile foundation is an earlier and more mature form of foundation. It has the advantages of strong bearing capacity, small settlement, and uniform settlement. It can adapt to various engineering geological conditions, especially in building structures on weak foundations. Wide range of applications.

Adjust the form of foundation.

How to carry out foundation construction when building a steel structure building?

In order to ensure the smooth progress of the construction of the steel structure project, the absolute stability of the foundation must be ensured.

A complete foundation is required to ensure the smooth progress of the steel structure project. It is also a prerequisite for safe use in the later period.

We did over 100+ projects, Please contact us to see more awesome projects.

Our Process

1. Design

K-Home is a comprehensive company that can provide one professional design. From Architectural drawings, steel structure layout, the installation guide layout, etc.

Every designer in our team has at least 10 years experience. You don’t have to worry about the unprofessional design affecting the safety of the building.

A professional design can help you save costs because we clearly know how to adjust and give you the most cost-effective solution, few companies will do this.

2. Manufacturing

Our factory has 2 production workshops with large production capacity and short delivery time. Generally, the lead time is around 15 days. All production is an assembly line, and each link is responsible and controlled by professional personnel. The important things are rust removal, welding, and painting.

Rust Remove: The steel frame uses shot blasting to remove the rust, reaching the Sa2.0 standard, Improve the roughness of the workpiece and the adhesion of the paint.

Welding: welding rod we choose is a J427welding rod or J507welding rod, they can make welding seam without defects.

Painting: The standard color of the paint is white and gray(customizable). There are 3 layers in total, the first layer, the middle layer, and the face layer, the total paint thickness is around 125μm~150μm based on the local environment.

3. Mark and Transportation

K-Home attaches great importance to mark, transportation, and packaging. Although there are many parts, in order to make you clear and reduce the site work, we mark each part with labels and take photos.

In addition, K-Home has rich experience in packing. the packing location of the parts will be planned in advance and the maximum usable space, as far as possible to reduce the number of packings for you and reduce the cost of shipping.

4. Detailed Installation Service

Before you received the cargo, a full set of installation files will be sent to you. You can download our sample installation file below for your reference. There are detailed house parts sizes, and marks.

Also, If this is the first time you to install the steel building, our engineer will customize a 3d installation guide for you. You don’t need to worry about the installation.

More Metal Building Kits

Contact Us >>

Have questions or need help? Before we start, you should know that almost all prefab steel buildings are customized.

Our engineering team will design it according to local wind speed, rain load, length*width*height, and other additional options. Or, we could follow your drawings. Please tell me your requirement, and we will do the rest!

Use the form to reach out and we will be in touch with you as quickly as possible.